Please enter your email address to reset your password. An email will be sent with instructions to create a new password. If you do not receive an email, please check your spam folder.
Don't have an account?
Are you a subscriber but don’t have an online account?
Register for full online access.
Would you like to receive email from Hanley Wood Media’s family of brands and partners?*
Note to existing JLC Subscribers:
If you choose to use your Social Network, please ensure that the email address associated with your Social Network matches the email associated with your JLC Subscription.
Thank you for creating your JLC Online account! Your JLC subscription purchase has begun in a new window.
If you see this message, make sure your popup blockers are disabled and click here to relaunch the subscription window.
Congratulations! Please check your e-mail for confirmation to gain full access to JLC Online's free features.
Please create a nickname to post in the forums.
A.You can expect
polyurethane glue to cure properly in woods with a
moisture content of up to 25 percent. Moisture has
to be present for polyurethane glue to cure, so the
moisture content of the wood to be glued should be
at least 8 percent. While there is no upper limit
per se for the glue to cure, I’d avoid
gluing wood with a moisture content higher than 25
percent, regardless of the glue. Wood with such a
high moisture content will shrink appreciably, and
the chances of joint failure are high.
Caulks Adhesives and Sealants
This Southern Forest Products guide includes preservative specs for different...
Q: When making structural changes that involve adding a point load to a house built on...
Where does the Lowe's ruling on lumber labeling leave those of us in the construction...
Instead of supporting decks with treated 6x6 posts, is it OK to assemble the support...
Please read our Content Guidelines before posting.
2014 Hanley Wood Media, Inc. All rights reserved.