Are you a subscriber but don’t have an online account?

Register for full online access.

 
 
 
 

More stories about Feature

  • Elevating Houses

    From financing to compacting fresh fill, we take an in-depth look at elevating a home.

  • Better Results With Vinyl

    A guide to best practices for product selection, installation, and repair of vinyl siding. How to identify better-quality products, and minimize problems by using sound installation and repair techniques.

  • An Efficient Box Truck Build-Out

    An organized work vehicle can save you a ton of time and effort, and it might even double as a portable workplace.

  • Portable Miter-Saw Stands

    An informal survey reveals the most popular manufactured models, plus some ingenious homemade options.

  • The Adjuster's Tool Kit

    Insurance adjusters are on the road for days or weeks at a time and need to be prepared. Here's what you should have on hand.

  • Getting Started as an Insurance Adjuster

    When a hurricane or other natural disaster strikes, CAT-adjusters go to work, assessing damage for insurance companies. Contractors looking for a job that takes their stiff joints and aching back off the jobsite might consider using their experience in construction as a licensed adjuster.

  • Thermal Imaging With a Blower Door

    Though it's impossible to seal every hole in an existing building to prevent air leaks, here's a procedure you can use to identify the worst leaks in order to tighten the home as cost-effectively as possible.

  • Tips for Building a Double Winder Stair

    In building this double winder stair, remodeler Dave Holbrook used modular boxes to stack one tread and riser at a tim.

  • Best Practices: Continuous Exterior Insulation

    A guide to selecting and installing rigid foam on walls.

  • Bracing Strategies for Wind and Seismic Loads

    Earthquakes and hurricanes act differently on a building. While shearwalls and moment frames are the standard solutions for handling lateral forces on building walls, the job they have to do can vary, depending on whether they’re facing a wind load or a seismic load.