Are you a subscriber but don’t have an online account?

Register for full online access.

 
 
 
 

More stories about FEATURE

  • Insulating Cathedral Ceilings

    JLC executive editor Clayton DeKorne explores some practical solutions to prevent call backs and boost energy performance.

  • Soldering Seams

    Regardless of the iron or tip used, soldering requires some prep work. Make sure that the tip is clean and that the four facets are flat and meet at a sharp point.

  • Elevating Houses

    From financing to compacting fresh fill, we take an in-depth look at elevating a home.

  • Better Results With Vinyl

    A guide to best practices for product selection, installation, and repair of vinyl siding. How to identify better-quality products, and minimize problems by using sound installation and repair techniques.

  • An Efficient Box Truck Build-Out

    An organized work vehicle can save you a ton of time and effort, and it might even double as a portable workplace.

  • Miter-Saw Stands - FastCap

    The basic FastCap Pro model has no wheels and comes with one continuous 64-inch wing with a metric or imperial scale and a flip stop. The rest of the stands have four wheels for better mobility, and include a variety of accessories.

  • Homemade Miter Saw Stands

    Many carpenters make their own saw stands, which they can tailor exactly to the work they do. These stands are their workbenches, and because the stands are wooden, users can nail or screw their accessories anywhere.

  • Trojan Workcenter

    The concept of the Trojan Workcenter is simple: Two pairs of collapsible legs firmly clamp to a 2-by rail, which you supply; there’s an MDF saw table and two adjustable support rollers that clamp to the top of the rail.

  • Ridgid AC9945

    According to the specs, the Ridgid AC9945 Miter Saw Utility Vehicle weighs just 57 pounds and extends to an overall length of about 9 1/2 feet.

  • Festool Kapex UG Mobile Miter Saw Station

    This station is designed to pair with the Kapex saw that many high-end finish carpenters like to use. The two extension wings give continuous support and provide extra work surface that is ideal for trim work, and simple flip stops allow repetitive cuts.