Are you a subscriber but don’t have an online account?

Register for full online access.

 
 
 
 

More stories about Bleeding

  • Latex Enamel Problems & Solutions

    Paint that deteriorates prematurely makes the whole job look shoddy. Here are the most common causes for water-based paint failures, and what to do about them.

  • Q&A: Slab Over an Existing Slab

    Q: What type of preparation work is needed before placing a 4 1/2-inch-thick topping over an existing slab?

  • Eight-Penny News

    Plastic laminate flooring, new protections for small businesses, thawing a frozen site

  • Q&A: Patching Water-Damaged Plaster

    Q: My company has done plaster repair work for many years. After repairing water-damaged walls or ceilings, we occasionally get called back to "fix" an unsuccessful repair. Our second repair attempt involves digging out a very bumpy, chalky substance, and more often than not, we have to repeat this...

  • Eight-Penny News

    U.S. Gypsum removes barrier EIFS from market, Big Apple plagued by exploding toilets, electrocution by crane, low-odor paints

  • Flat Roof Framing Options

    Even “flat” roofs need some pitch to ensure proper drainage. A California production framer describes the techniques he uses to quickly create slopes on flat roof decks of any size.

  • Caulking Joints in Masonry

    Where wood and metal meet masonry, a caulked joint is often the only way to keep the water out. Here’s how to ensure durable, waterproof joints.

  • Controlling Cracks in Concrete Slabs

    It’s inevitable: A concrete slab is going to crack. But how much it cracks, and where, depends on the amount of water in the mix, where you place control joints, and how you finish the slab. Here’s what you need to know for good results.

  • Building With Style: Getting Rid of Surface Water

    Getting rid of surface water

  • Q&A: Flaking Concrete

    Q: What causes a concrete slab to form a thin top coat that can flake off or, if something is dropped on it, chip off in big pieces? Some customers want a glasslike finish on their garage floors, but after screeding and power troweling, the surface often becomes a thin, flaky material that doesn’t...