Are you a subscriber but don’t have an online account?

Register for full online access.

 
 
 
 

More stories about Casework

  • Wood-Steel Composite Beam?

    We're considering through-bolting LVL lumber to both sides of a steel I-beam. We'd install the resulting composite beam flush at midspan in an existing floor system, with the LVL providing convenient nailing for joist hangers. Can we assume that the combined load-bearing values for LVL and steel...

  • Jevons Tool 3D Squares

    Jevons Tool 3D Squares are designed to aid in clamping casework corners and other joinery.

  • Fast Job-Site Joinery

    Finish carpentry is all about making joints quickly and accurately.

  • Custom-Carved Corbels

    As part of a job finishing a side-porch addition to a Victorian home, I had to reproduce six decorative corbels.

  • Rockler Woodworking and Hardware SpeedCope

    The SpeedCope costs way less than the $2,000 coping machines you find in a production wood shop — but it does a better job than a $35 handheld plastic template that fits only one type of molding and angle.

  • Installing a Wood Parquet Floor

    Assessing the moisture content and surface condition of the slab was the critical first step.

  • Back-Priming Fiber-Cement Siding

    Q: We ordered preprimed HardiePlank lap siding to finish a project, but when it was delivered, we discovered that the backs were left unprimed. Normally, we back-prime wood clapboards, but I'm not sure this step is needed with fiber-cement siding, and the manufacturer's Web site is mute on the...

  • On the Job

    Open valley flashing; cooler cabinet

  • Practical Cabinetmaking

    Build great-looking kitchens with these simple, efficient methods.

  • Products

    Toekick drawers; ductless cooktop exhaust; trimmable truss; low-profile smoke alarm; flexible cement board; light MDF; more