Are you a subscriber but don’t have an online account?

Register for full online access.

 
 
 
 

More stories about Joints

  • Making EIFS Watertight

    An EIFS installation is only as strong as its weakest details. A veteran EIFS troubleshooter tells how to keep the water out at penetrations.

  • Reducing Drywall Callbacks

    A drywall contractor explains the techniques and materials he uses to prevent nail pops and visible seams.

  • Fine-Tuning Forced-Hot Air

    A heating contractor details how to upgrade from a typical bare-bones heating system to one that delivers comfort and customer satisfaction.

  • Glass Block Tips & Tricks

    In this article, a veteran glass block contractor explains the details that make for an elegant and trouble-free installation.

  • Q&A: Identifying Poria Fungus

    Q: While renovating a home in New Jersey, I found a fungus-like growth a few inches long growing between the tile floor and the base molding in the bathroom. The house is on a concrete slab. Is there anywhere I can have this growth tested to see if it is poria?

  • Q&A: Glues That Can Fill Gaps

    Q: What’s the best wood glue for less than ideal joints requiring gap filling?

  • Q&A: Gluing to End-Grain

    Q: What’s the best wood glue for end-grain applications — miter joints, for example?

  • Q&A: Dissasembling Yellow Glue Joints

    Q: After a wood joint glued with yellow carpenter’s glue has cured, is there any way to disassemble the joint?

  • Q&A: Water-Resistant Glue Standards

    Q: Are the terms "water-resistant" and "waterproof" based on any technical standards?

  • Q&A: Glues That Can Fill Gaps

    Q: What’s the best wood glue for less than ideal joints requiring gap filling?