Please enter your email address to reset your password. An email will be sent with instructions to create a new password. If you do not receive an email, please check your spam folder.
Don't have an account?
Are you a subscriber but don’t have an online account?
Register for full online access.
Would you like to receive email from Hanley Wood Media’s family of brands and partners?*
Note to existing JLC Subscribers:
If you choose to use your Social Network, please ensure that the email address associated with your Social Network matches the email associated with your JLC Subscription.
Thank you for creating your JLC Online account! Your JLC subscription purchase has begun in a new window.
If you see this message, make sure your popup blockers are disabled and click here to relaunch the subscription window.
Congratulations! Please check your e-mail for confirmation to gain full access to JLC Online's free features.
Please create a nickname to post in the forums.
A sharp point is needed to control the flow and direction of the solder, especially on vertical joints. For a pyramid-tipped, acetylene-fueled soldering iron, make sure that the tip is clean and that the four facets are flat and meet at a fine point.
On a callback for a siding leak, a building inspector discovers that his roof inspection hadn't been nearly thorough enough
They look like slate but weigh a lot less
A bowed, sagging wall complicated this custom repair.
Regardless of the iron or tip used, soldering requires some prep work. Make sure that the tip is clean and that the four facets are flat and meet at a sharp point.
All new and remodeled roofs in Los Angeles will now be required to reflect sunlight, not absorb it.
Although Atlas' new high-performance or HP Technology Shingles are no thicker than other architectural grade roof shingles, they're warranted to withstand 130 mph winds with four nails per shingle and a 6-inch course exposure.
Roof overhangs can be finished in a number of materials and constructed in a wide variety of different ways. Here's what you need to know to construct eaves that will survive the test of time.
Insurance adjusters are on the road for days or weeks at a time and need to be prepared. Here's what you should have on hand.
A closed-cell EPS bonded to high-density polyisocyanurate cover board, InsulFoam’s HD Composite has a UL Class-A fire rating.
2014 Hanley Wood Media, Inc. All rights reserved.