Download PDF version (221.2k) Log In or Register to view the full article as a PDF document.
Q.What is the proper technique for setting a toilet on an irregular tiled floor?

A.Terry Love, a plumbing contractor in Bellevue, Wash., responds: Most floors are a little uneven — with tile floors being the worst — so toilets often need to be shimmed when they're set. I like to set the toilet down first without wax to get a better idea of where the high and low spots are. Then, when I set the toilet, I use either a wax seal, which works well with older cast-iron and lead DWV systems, or the Fluidmaster Wax-Free Bowl Gasket (Fluidmaster, 949/728-2000, www.fluidmaster.com), which seems to work best with newer plastic waste lines.

To shim the toilet, I generally use cedar door shims because they have a more gradual taper than the plastic ones I've seen. I try to shim from back to front so that the front of the bowl is touching the floor, and from side to side so that the toilet is level. Shims usually end up at the back of the bowl, where they're held in place by the weight of the toilet. After the toilet bolts have been snugged up, I caulk at the front of the bowl, from bolt to bolt, for sanitary purposes. If a leak develops only around the gasket, it's better to know about it than to conceal it behind a continuous bead of caulk, so I leave off the caulk around the back.