Launch Slideshow

Stucco Rainscreen - Delta Dry Stucco

Stucco Rainscreen - Delta Dry Stucco

  • http://www.jlconline.com/Images/923575098_stucco-rainscreen-1_tcm96-2157704.jpg?width=333

    true

    333

    Delta Dry Stucco & Stone comes in rolls that look alot like a foundation waterproofing product. It’s a plastic dimple mat on the back.

  • http://www.jlconline.com/Images/1635270_stucco-rainscreen-2_tcm96-2157711.jpg?width=600

    true

    600

    You can see the plastic dimple has a fabric adhered to one side. The plastic nipples go against your WRB (weather resistive barrier) and the fabric faces out.

  • http://www.jlconline.com/Images/62664709_stucco-rainscreen-3_tcm96-2157712.jpg?width=333

    true

    333

    It’s hard to get a good close up on the fabric, but it look alot like a silt fence material. Obviously porous and lightweight but tough.

  • http://www.jlconline.com/Images/106654361_stucco-rainscreen-4_tcm96-2157707.jpg?width=600

    true

    600

    It rolls out easily as it’s lightweight and we tacked it up with a few roofing nails.

  • http://www.jlconline.com/Images/112083552_stucco-rainscreen-5_tcm96-2157714.jpg?width=600

    true

    600

    Sprinkler that was wetting the building and caused huge failures.

  • http://www.jlconline.com/Images/1474115990_stucco-rainscreen-6_tcm96-2157706.jpg?width=333

    true

    333

    Once the Delta Dry Stucco & Stone is applied, you’ll staple the wire mesh up as usual but with a longer staple.

  • http://www.jlconline.com/Images/424856206_stucco-rainscreen-7_tcm96-2157705.jpg?width=600

    true

    600

  • http://www.jlconline.com/Images/933523952_stucco-rainscreen-8_tcm96-2157709.jpg?width=600

    true

    600

    Also, you’ll notice that we are NOT using a layer of felt behind the stucco. The felt behind stucco is meant to be a bond breaker, meaning the stucco scratch coat (1st coat) bonds to the felt paper and the WRB behind that won’t get clogged. In this case, the fabric on the Delta Dry Stucco & Stone is the bond breaker and keeps the scratch coat from filling the air space.

  • http://www.jlconline.com/Images/1305832416_stucco-rainscreen-9_tcm96-2157708.jpg?width=600

    true

    600

    The rest of the Stucco job proceeds as normal. This project was a traditional 3 coat system with the finish coat being an integral color LaHabra Smooth Santa Barbara Mission Finish.

  • http://www.jlconline.com/Images/2032202579_stucco-rainscreen-10_tcm96-2157713.jpg?width=600

    true

    600

    Notice my custom hood for the electrical panel. Also, the AC Linesets have my favorite QuickFlash flashing boot on them.

  • http://www.jlconline.com/Images/1372291046_stucco-rainscreen-11_tcm96-2157716.jpg?width=600

    true

    600

    I took these pictures after a rain event and it’s pretty clear how the stucco is absorbing water! I’m glad I’ve got a nice air gap behind there so it can dry harmlessly

  • http://www.jlconline.com/Images/861674907_stucco-rainscreen-12_tcm96-2157715.jpg?width=600

    true

    600

  • http://www.jlconline.com/Images/2014292040_stucco-rainscreen-13_tcm96-2157718.jpg?width=392

    true

    392

    Nick Deaver Architects – Construction by Risinger Homes

  • http://www.jlconline.com/Images/2117194625_stucco-rainscreen-14_tcm96-2157717.jpg?width=600

    true

    600

    Nick Deaver Architects – Construction by Risinger Homes

Did you see my post a few weeks ago about a massive stucco failure?  Stucco and it's failures seems to be a perennial hot topic amongst builders, architects, and even realtors!  I saw yesterday that it made the Builder Magazine top 5 list of dreaded callbacks.

So, how can we build a stucco assembly that will be just as durable and "safe" as a traditional siding house?  First, we must understand that stucco is a Reservoir cladding.  I'm quoting Building Science Corp on this cladding since I can't say it any better….

"Claddings made of wood, fiber cement, stucco, concrete, and masonry all absorb water to varying degrees. Once the reservoirs get wet, the stored water can migrate elsewhere and cause problems. Therefore, reservoir claddings must be decoupled from water sensitive materials of the wall assembly. 

As with any cladding in a water-managed assembly, drainage must be provided behind reservoir claddings.  Drainage requires two things: 1) a drainage plane and 2) a drainage space (see Information Sheet 301 – Drainage Plane/Water Resistive Barirer).

Absorbed water migrates by capillary transport or changes to a vapor and migrates by air flow or diffusion. Therefore, in addition to drainage, reservoir claddings also require control layers for capillary water, airflow, and water vapor. "  - Building Science Corp – Reservoir Cladding Info Sheet Link to read the whole article

The quote above refers to both a "Drainage Plane", and a "Drainage Space".  The Drainage Plane is basically the WRB or the waterproofing you see on the outside of the structure, but here's where Delta Dry Stucco & Stone comes in as it provides a unique (and easy) method to provide that drainage space (often referred to as a Rain Screen).

It rolls out easily as it's lightweight and we tacked it up with a few roofing nails.  What I really like about this product is that it creates two air spaces that are separated by the zero perm plastic dimples.  Once you roll this on, you'll have an air space in front of your WRB (Delta Vent SA on this house I built) AND you'll have another air gap behind your stucco.  This is really unique because now when my stucco gets wet and absorbs water it can dry in the air gap behind without getting the air plane in front of the WRB steamy.  I'm referring specifically to Solar Driven moisture.  This happens alot in the South:  Sprinklers go off at 4AM and wet the stucco 3x per week but when you get out of the house at 8Am the stucco appears dry but it's actually full of moisture.  Then, the Sun comes up and hits the house at 11AM.  That moisture in the stucco is driven by the solar radiation to want to dry towards the inside.  This is why your air barrier & vapor barrier is so vital on the outside of your house.  If there are any penetrations in your WRB that leak some air that air is going to be very moist/humid and when it leaks inside the wall cavity it will drop that moisture once it hits a cold condensing surface.  Mold and Rot occur and sometimes it's a dramatic failure, sometimes it takes a decade+ to show up.  See my photo below of a 10 year old restaurant that had stucco getting wet from a sprinkler head.

Sorry for the Building Science tangent… once the Delta Dry Stucco & Stone is applied you'll staple the wire mesh up as usual but with a longer staple.  Also, you'll notice that we are NOT using a layer of felt behind the stucco.  The felt behind stucco is meant to be a bond breaker, meaning the stucco scratch coat (1st coat) bonds to the felt paper and the WRB behind that won't get clogged.  In this case, the fabric on the Delta Dry Stucco & Stone is the bond breaker and keeps the scratch coat from filling the air space.

If you'd like more info on the Delta Vent SA housewrap you can see my review here. And here's the link to the Delta Dry Stucco & Stone homepage.

I'll leave you with a Dr Joe Lstiburek quote:
"Rain is the single most important factor to control in order to construct a durable structure." 

Risinger Homes is a custom builder and whole house remodeling contractor that specializes in Architect driven and fine craftsmanship work. We utilize an in-house carpentry staff and the latest building science research to build dramatically more efficient, healthy and durable homes.

To read this original article click here. Be sure to check out my video blog on YouTube.