Best Practices

Posted on
Rooftop Terror

Who knows what evil lurks under those freshly nailed shingles? More

Posted on
Adopting New Technology: Mistakes to Avoid

Making the Most out of Going Paperless. More

Posted on
Window Replacement Tips from the “Minnesota MacGyver” of Installation

Callbacks can wipe out your profit on an installation job. Avoid the risk with... More

Deck Railing Options with Mike Guertin

Besides meeting code, deck railings should look good. Mike Guertin explains what the structural requirements are for a code-compliant railing system in this PDB Zone presentation, recorded live at the Deck Expo in Baltimore last fall. Guertin covers familiar ground, such as how to build a wood railing system to the proper dimensions using well-executed connection details. He also talks about a new vertical cable railing system from Fortress, which eliminates concerns that some clients may have about horizontal cable railing. Perhaps best of all, Guertin explains his neat trick for laying out balusters so that they are evenly spaced, which relies on a length of non-roll elastic fabric tape instead of a calculator. Check it out. More

Railing Post Connections With Mike Guertin

Connecting 4x4 railing posts to deck framing is easy - a few bolts and it’s good to go, right? Well, not so fast … most building codes demand that those railing posts be strong enough to withstand at least a 500-pound load applied to the post in any direction (for more information, see Code-Compliant Guardrail Posts). That’s a lot of force, and rail posts are required to withstand it because they're a critical safety component on a deck, especially if the deck is high above the ground. Will the railing system you install be strong enough when large groups of friends are leaning against it during big parties?Fortunately, manufacturers like Simpson Strong-Tie and Fastenmaster have developed and tested a number of different connection details for 4x4 wood posts that are strong enough to meet code. There are also manufactured guard post assemblies that meet code, but in his presentation at the 2018 Deck Expo, deck expert and frequent PDB and JLC contributor Mike Guertin explains that there are a couple of important details that are often omitted in the manufacturer's installation instructions for these products. We've captured Mike's demonstration on video, where he discusses the fasteners, hardware, and special blocking details that he uses to confidently install code-compliant railing posts in virtually any situation. Because this is a live performance, Mike misidentifies a few of the fasteners, but it's not hard to figure out his intention, and - as usual - his advice is rock-solid. More

Posted on
4 Mistakes to Avoid When Building Megadecks

Big decks can become big nightmares without proper construction techniques. More

Posted on
Maintaining Fire Ratings with Decorative Drywall Finishes

While some decorative drywall finishing methods can help contractors win bids, not... More

Posted on
3 Best Practices for Sealing Wall Penetrations — and Preventing Mold

Ignoring these crucial details can lead to a water intrusion nightmare More

Posted on
Advocating for Fresh Air in Homes

HIVE panelist and entrepreneur Bill Hayward has a passion for cleaner indoor air More

Close X