Anchors set too shallow or too close to
the edge of a slab or tube will cause the
concrete to crack and pop loose, rendering
the anchor useless. One solution is
Ankr-Tite's Power-Sert drop-in anchor,
which works in combination with the
company's Inject-Tite epoxy adhesive to
form a high-strength bond in relatively
shallow holes and tight spacing patterns.
Small overbore tolerances allow predrilling
through base plate or machinery
mounting holes without moving the
piece to be attached. And because the
anchors hold by friction until the epoxy
sets, attachments can be made immediately.
According to the manufacturer,
Power-Serts display higher resistance to
seismic loading and vibration than most
drop-in anchors. The anchors are
threaded at the top to accept