From the bottom of your siding to the peak of your roof, Cor-A-Vent, Inc, manufactures ventilation products to protect your home from damaging moisture from within and from without - From the Ground, Up!
For over 35 years, Cor-A-Vent has manufactured the roof ventilation products necessary to provide your home with the breath of fresh air needed to protect it inside and out, as recommended by the National Association of Home Builders. Since the V-400, the original shingle-over ridge vent, was officially introduced in 1976, Cor-A-Vent has been at the forefront of the attic ventilation market.
With roof ventilation systems including ridge vents, hip vents, our very own Roof-2-Wall Vents, the IN-Vent, the purlin vent for metal roofs and the Revolution Rolled Ridge Vent we've got your roof and attic ventilation problems solved. And don't forget about our rain screen siding vents, including the Sturdi-Strip and new Sturdi-Batten. Cor-A-Vent has been a trusted name in home ventilation since 1976.
Featured Products
SV-3 Rainscreen Siding Vent
Sturdi-Strip Rainscreen Furring Strips
SV-5 Rainscreen Siding Vent
V600 Ridge Vent
Revolution Rolled Ridge Vent
S-400 Strip Vent
More from JLC
Leaking Ridge Vent
I had a sunroom addition put on my home, it measures 16’ wide x 24’ in length. There are four (4) skylights approx 2’ wide x 4’ in length on each side of the roof (4/12 pitch) Cathedral ceiling construction with scissor trusses, R-68 fiberglass insulation with plastic vapor barrier on underside of trusses with 5/4 quarter T&G pine. The
More
Hip roof venting
I have a project coming up with a small hip roof: 28'x28", 5/12 pitch. I'm looking for ideas on how to vent this.I prefer not to use the metal box vents or a cupola.
I have done a bit of online research and see that some of the shingle over vents such as Cor-a-Vent and Tamko are rated for a
More
Venting a Vaulted Valley
I have a question about venting cathedral ceilings that have valleys in them. We have a plan that we build a few times and will build a few more times in the near future. The upstairs is all vaulted. The roof starts on top of 5' walls and all the interior walls frame to the roof. We always drill holes
More